This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Sinkers. On average he throws it 97.2 MPH and topping out at 99.2 MPH.
He will typically have 14.6 revolutions (2266 RPM) from hand to the plate. He throws it in the strike zone 65% of the time.
This is the location of all his Sweepers. On average he throws it 86.9 MPH and topping out at 89.5 MPH.
He will typically have 19.2 revolutions (2661 RPM) from hand to the plate. He throws it in the strike zone 38% of the time.
This is the location of all his Cutters. On average he throws it 93.6 MPH and topping out at 96.3 MPH.
He will typically have 15.4 revolutions (2304 RPM) from hand to the plate. He throws it in the strike zone 55% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Sinker. On average the ball moves 16 inches away from a right handed batter
and drops 26 inches . League average horizontal movement is 15 inches and 24 inches drop.
This is the movement of his Sweeper. On average the ball moves 14 inches towards a right handed batter
and drops 34 inches . League average horizontal movement is 14 inches and 41 inches drop.
This is the movement of his Cutter. On average the ball moves 1 inch towards a right handed batter
and drops 24 inches . League average horizontal movement is 2 inches and 28 inches drop.
This is all his release points. On average he releases the ball 5.5ft from the ground.
This is the release point of all his Sinkers. On average he releases the ball 5.6ft. from the ground.
This is the release point of all his Sweepers. On average he releases the ball 5.4ft. from the ground.
This is the release point of all his Cutters. On average he releases the ball 5.6ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Garcia's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Sinker Sweeper Cutter