This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Sinkers. On average he throws it 93.8 MPH and topping out at 96.4 MPH.
He will typically have 14.5 revolutions (2177 RPM) from hand to the plate. He throws it in the strike zone 49% of the time.
This is the location of all his Cutters. On average he throws it 87.3 MPH and topping out at 91.3 MPH.
He will typically have 14.7 revolutions (2056 RPM) from hand to the plate. He throws it in the strike zone 43% of the time.
This is the location of all his Sliders. On average he throws it 82.6 MPH and topping out at 84.8 MPH.
He will typically have 18.1 revolutions (2388 RPM) from hand to the plate. He throws it in the strike zone 14% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Sinker. On average the ball moves 8 inches away from a right handed batter
and drops 14 inches . League average horizontal movement is 15 inches and 24 inches drop.
This is the movement of his Cutter. On average the ball moves 2 inches away from a right handed batter
and drops 30 inches . League average horizontal movement is 2 inches and 27 inches drop.
This is the movement of his Slider. On average the ball moves 1 inch away from a right handed batter
and drops 42 inches . League average horizontal movement is 4 inches and 36 inches drop.
This is all his release points. On average he releases the ball 6.0ft from the ground.
This is the release point of all his Sinkers. On average he releases the ball 6.1ft. from the ground.
This is the release point of all his Cutters. On average he releases the ball 6.0ft. from the ground.
This is the release point of all his Sliders. On average he releases the ball 5.9ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Dodd's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Sinker Cutter Slider
