This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Sinkers. On average he throws it 94.0 MPH and topping out at 95.9 MPH.
He will typically have 14.3 revolutions (2149 RPM) from hand to the plate. He throws it in the strike zone 68% of the time.
This is the location of all his Curveballs. On average he throws it 84.4 MPH and topping out at 86.4 MPH.
He will typically have 19.5 revolutions (2626 RPM) from hand to the plate. He throws it in the strike zone 13% of the time.
This is the location of all his Cutters. On average he throws it 90.2 MPH and topping out at 92.4 MPH.
He will typically have 16.3 revolutions (2350 RPM) from hand to the plate. He throws it in the strike zone 33% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Sinker. On average the ball moves 16 inches towards a right handed batter
and drops 25 inches . League average horizontal movement is 15 inches and 23 inches drop.
This is the movement of his Curveball. On average the ball moves 8 inches away from a right handed batter
and drops 48 inches . League average horizontal movement is 9 inches and 53 inches drop.
This is the movement of his Cutter. On average the ball moves 1 inch away from a right handed batter
and drops 25 inches . League average horizontal movement is 2 inches and 25 inches drop.
This is all his release points. On average he releases the ball 5.4ft from the ground.
This is the release point of all his Sinkers. On average he releases the ball 5.3ft. from the ground.
This is the release point of all his Curveballs. On average he releases the ball 5.4ft. from the ground.
This is the release point of all his Cutters. On average he releases the ball 5.2ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Murdock's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Sinker Curveball Cutter
