This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Sinkers. On average he throws it 94.5 MPH and topping out at 97.4 MPH.
He will typically have 13.8 revolutions (2082 RPM) from hand to the plate. He throws it in the strike zone 64% of the time.
This is the location of all his Sliders. On average he throws it 82.7 MPH and topping out at 85.9 MPH.
He will typically have 19.4 revolutions (2555 RPM) from hand to the plate. He throws it in the strike zone 40% of the time.
This is the location of all his Cutters. On average he throws it 90.4 MPH and topping out at 91.8 MPH.
He will typically have 16.6 revolutions (2406 RPM) from hand to the plate. He throws it in the strike zone 22% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Sinker. On average the ball moves 17 inches towards a right handed batter
and drops 24 inches . League average horizontal movement is 15 inches and 24 inches drop.
This is the movement of his Slider. On average the ball moves 16 inches away from a right handed batter
and drops 38 inches . League average horizontal movement is 5 inches and 36 inches drop.
This is the movement of his Cutter. On average the ball moves 0 inches towards a right handed batter
and drops 25 inches . League average horizontal movement is 3 inches and 26 inches drop.
This is all his release points. On average he releases the ball 5.3ft from the ground.
This is the release point of all his Sinkers. On average he releases the ball 5.3ft. from the ground.
This is the release point of all his Sliders. On average he releases the ball 5.4ft. from the ground.
This is the release point of all his Cutters. On average he releases the ball 5.3ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Llovera's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Sinker Slider Cutter
