This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Sinkers. On average he throws it 95.5 MPH and topping out at 96.2 MPH.
He will typically have 14.0 revolutions (2126 RPM) from hand to the plate. He throws it in the strike zone 46% of the time.
This is the location of all his Cutters. On average he throws it 92.6 MPH and topping out at 94.0 MPH.
He will typically have 16.4 revolutions (2427 RPM) from hand to the plate. He throws it in the strike zone 42% of the time.
This is the location of all his Changeups. On average he throws it 87.3 MPH and topping out at 88.2 MPH.
He will typically have 14.0 revolutions (1940 RPM) from hand to the plate. He throws it in the strike zone 46% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Sinker. On average the ball moves 16 inches towards a right handed batter
and drops 20 inches . League average horizontal movement is 15 inches and 23 inches drop.
This is the movement of his Cutter. On average the ball moves 0 inches towards a right handed batter
and drops 22 inches . League average horizontal movement is 2 inches and 25 inches drop.
This is the movement of his Changeup. On average the ball moves 16 inches towards a right handed batter
and drops 32 inches . League average horizontal movement is 14 inches and 32 inches drop.
This is all his release points. On average he releases the ball 6.1ft from the ground.
This is the release point of all his Sinkers. On average he releases the ball 6.0ft. from the ground.
This is the release point of all his Cutters. On average he releases the ball 6.1ft. from the ground.
This is the release point of all his Changeups. On average he releases the ball 6.0ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Trivino's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Sinker Cutter Changeup
