This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Cutters. On average he throws it 92.5 MPH and topping out at 96.8 MPH.
He will typically have 18.0 revolutions (2660 RPM) from hand to the plate. He throws it in the strike zone 50% of the time.
This is the location of all his Sliders. On average he throws it 84.5 MPH and topping out at 87.5 MPH.
He will typically have 18.6 revolutions (2515 RPM) from hand to the plate. He throws it in the strike zone 39% of the time.
This is the location of all his Sinkers. On average he throws it 93.9 MPH and topping out at 96.5 MPH.
He will typically have 15.8 revolutions (2361 RPM) from hand to the plate. He throws it in the strike zone 51% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Cutter. On average the ball moves 5 inches away from a right handed batter
and drops 16 inches . League average horizontal movement is 2 inches and 25 inches drop.
This is the movement of his Slider. On average the ball moves 5 inches away from a right handed batter
and drops 41 inches . League average horizontal movement is 4 inches and 35 inches drop.
This is the movement of his Sinker. On average the ball moves 6 inches towards a right handed batter
and drops 12 inches . League average horizontal movement is 15 inches and 23 inches drop.
This is all his release points. On average he releases the ball 6.4ft from the ground.
This is the release point of all his Cutters. On average he releases the ball 6.4ft. from the ground.
This is the release point of all his Sliders. On average he releases the ball 6.4ft. from the ground.
This is the release point of all his Sinkers. On average he releases the ball 6.5ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Jansen's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Cutter Slider Sinker
