This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Cutters. On average he throws it 92.7 MPH and topping out at 94.5 MPH.
He will typically have 18.8 revolutions (2788 RPM) from hand to the plate. He throws it in the strike zone 55% of the time.
This is the location of all his Sweepers. On average he throws it 83.4 MPH and topping out at 85.9 MPH.
He will typically have 23.8 revolutions (3157 RPM) from hand to the plate. He throws it in the strike zone 47% of the time.
This is the location of all his Sinkers. On average he throws it 93.4 MPH and topping out at 94.9 MPH.
He will typically have 16.4 revolutions (2445 RPM) from hand to the plate. He throws it in the strike zone 25% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Cutter. On average the ball moves 0 inches towards a right handed batter
and drops 18 inches . League average horizontal movement is 2 inches and 25 inches drop.
This is the movement of his Sweeper. On average the ball moves 20 inches away from a right handed batter
and drops 41 inches . League average horizontal movement is 14 inches and 38 inches drop.
This is the movement of his Sinker. On average the ball moves 14 inches towards a right handed batter
and drops 23 inches . League average horizontal movement is 15 inches and 23 inches drop.
This is all his release points. On average he releases the ball 5.3ft from the ground.
This is the release point of all his Cutters. On average he releases the ball 5.3ft. from the ground.
This is the release point of all his Sweepers. On average he releases the ball 5.2ft. from the ground.
This is the release point of all his Sinkers. On average he releases the ball 5.2ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Roberts's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Cutter Sweeper Sinker