This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Cutters. On average he throws it 98.9 MPH and topping out at 102.0 MPH.
He will typically have 16.5 revolutions (2601 RPM) from hand to the plate. He throws it in the strike zone 60% of the time.
This is the location of all his Sliders. On average he throws it 88.5 MPH and topping out at 93.1 MPH.
He will typically have 17.7 revolutions (2504 RPM) from hand to the plate. He throws it in the strike zone 43% of the time.
This is the location of all his Sinkers. On average he throws it 98.5 MPH and topping out at 99.8 MPH.
He will typically have 15.3 revolutions (2412 RPM) from hand to the plate. He throws it in the strike zone 43% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Cutter. On average the ball moves 4 inches away from a right handed batter
and drops 16 inches . League average horizontal movement is 2 inches and 25 inches drop.
This is the movement of his Slider. On average the ball moves 8 inches away from a right handed batter
and drops 34 inches . League average horizontal movement is 4 inches and 35 inches drop.
This is the movement of his Sinker. On average the ball moves 6 inches towards a right handed batter
and drops 16 inches . League average horizontal movement is 15 inches and 24 inches drop.
This is all his release points. On average he releases the ball 6.0ft from the ground.
This is the release point of all his Cutters. On average he releases the ball 6.0ft. from the ground.
This is the release point of all his Sliders. On average he releases the ball 6.0ft. from the ground.
This is the release point of all his Sinkers. On average he releases the ball 6.1ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Clase's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Cutter Slider Sinker
