This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Cutters. On average he throws it 88.6 MPH and topping out at 90.5 MPH.
He will typically have 18.3 revolutions (2604 RPM) from hand to the plate. He throws it in the strike zone 46% of the time.
This is the location of all his Sinkers. On average he throws it 92.3 MPH and topping out at 94.8 MPH.
He will typically have 15.7 revolutions (2308 RPM) from hand to the plate. He throws it in the strike zone 48% of the time.
This is the location of all his Sweepers. On average he throws it 80.2 MPH and topping out at 83.5 MPH.
He will typically have 20.2 revolutions (2583 RPM) from hand to the plate. He throws it in the strike zone 35% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Cutter. On average the ball moves 4 inches towards a right handed batter
and drops 26 inches . League average horizontal movement is 2 inches and 28 inches drop.
This is the movement of his Sinker. On average the ball moves 12 inches away from a right handed batter
and drops 25 inches . League average horizontal movement is 15 inches and 24 inches drop.
This is the movement of his Sweeper. On average the ball moves 19 inches towards a right handed batter
and drops 38 inches . League average horizontal movement is 14 inches and 42 inches drop.
This is all his release points. On average he releases the ball 5.3ft from the ground.
This is the release point of all his Cutters. On average he releases the ball 5.4ft. from the ground.
This is the release point of all his Sinkers. On average he releases the ball 5.3ft. from the ground.
This is the release point of all his Sweepers. On average he releases the ball 5.3ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Davis's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Cutter Sinker Sweeper