This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Sweepers. On average he throws it 82.1 MPH and topping out at 84.7 MPH.
He will typically have 20.8 revolutions (2715 RPM) from hand to the plate. He throws it in the strike zone 35% of the time.
This is the location of all his Sinkers. On average he throws it 89.6 MPH and topping out at 91.9 MPH.
He will typically have 14.0 revolutions (2007 RPM) from hand to the plate. He throws it in the strike zone 45% of the time.
This is the location of all his Cutters. On average he throws it 87.1 MPH and topping out at 88.5 MPH.
He will typically have 17.5 revolutions (2439 RPM) from hand to the plate. He throws it in the strike zone 29% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Sweeper. On average the ball moves 14 inches towards a right handed batter
and drops 41 inches . League average horizontal movement is 14 inches and 41 inches drop.
This is the movement of his Sinker. On average the ball moves 16 inches away from a right handed batter
and drops 31 inches . League average horizontal movement is 15 inches and 24 inches drop.
This is the movement of his Cutter. On average the ball moves 0 inches towards a right handed batter
and drops 31 inches . League average horizontal movement is 2 inches and 27 inches drop.
This is all his release points. On average he releases the ball 6.0ft from the ground.
This is the release point of all his Sweepers. On average he releases the ball 5.9ft. from the ground.
This is the release point of all his Sinkers. On average he releases the ball 6.2ft. from the ground.
This is the release point of all his Cutters. On average he releases the ball 6.1ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Krook's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Sweeper Sinker Cutter
