This is the location of all his individual pitches and a zone chart at the top showing density of locations.
This is the location of all his Sinkers. On average he throws it 94.5 MPH and topping out at 96.5 MPH.
He will typically have 13.0 revolutions (1951 RPM) from hand to the plate. He throws it in the strike zone 61% of the time.
This is the location of all his Sweepers. On average he throws it 82.3 MPH and topping out at 84.8 MPH.
He will typically have 19.5 revolutions (2550 RPM) from hand to the plate. He throws it in the strike zone 35% of the time.
This is the location of all his Cutters. On average he throws it 87.2 MPH and topping out at 90.3 MPH.
He will typically have 16.7 revolutions (2325 RPM) from hand to the plate. He throws it in the strike zone 40% of the time.
This is all his pitches showing horizontal & vertical movement with gravity in inches.
This is the movement of his Sinker. On average the ball moves 16 inches away from a right handed batter
and drops 29 inches . League average horizontal movement is 15 inches and 24 inches drop.
This is the movement of his Sweeper. On average the ball moves 18 inches towards a right handed batter
and drops 44 inches . League average horizontal movement is 15 inches and 42 inches drop.
This is the movement of his Cutter. On average the ball moves 4 inches towards a right handed batter
and drops 35 inches . League average horizontal movement is 2 inches and 29 inches drop.
This is all his release points. On average he releases the ball 5.2ft from the ground.
This is the release point of all his Sinkers. On average he releases the ball 5.2ft. from the ground.
This is the release point of all his Sweepers. On average he releases the ball 5.4ft. from the ground.
This is the release point of all his Cutters. On average he releases the ball 5.3ft. from the ground.
This all his pitches out of the zone.
This is all his pitches on the edge of the zone.
This is all his swing & misses.
Radial Chart
Barrels
Spray Chart
Here's the flow of all
Bummer's pitches this season. Connecting bars and pie charts
are sized by density of pitches for each count. Sinker Sweeper Cutter